how do i evolution the ink tape for an epson 820 printer?

It is an Epson Stylus Photo printer. Thanks.

how do i evolution the ink tape for an epson 820 printer?

Q:



How do I replace an ink videotape when an ink low or out condition occurs?

A:



Make sure the printer is on but not printing. Press down the Ink Cartridge Replacement button until the print head move to the center. Pull up the empty ink videotape clamp all the approach. The cartridge rises up from its holder and should be disposed. Unwrap the ink cartridge(s) man careful not to touch the green circuit board on the hindmost of the cartridge, consequently remove ONLY the yellow cassette seal from the black or color ink tape. If you accidentally remove anything but the yellow trademark you cannot use the cartridge or it will interrupt the printer. To install the new videotape, tilt the ink cartridge forward slightly as you lower it into its holder. Hang the tab at the back of the videotape on the hooks on the holder clamps. Don't place the cartridge tab under the hooks on the holder clamp; you may spoil the clamp when you close it. Install the ink cartridge and push down on the ink videotape clamp until it locks in place. Press the Ink Cartridge Replacement button to initiate charging the ink delivery system. Charging take about a minute and is complete when the power feathery stops flashing and the error light go out. For more information on installing an ink cartridge please refer to your Start Here poster or your Printer
first switch of your printer.

after it initiate your printer cover. if don't know how then see printer booklete.

after approachable it you can show a black item there. and you can also see how to remove it within to the printer cover or box.